Citation: | WANG Luzhao, WU Haixia. Research of diamond bit in Wulong Gold Mine, Liaoning Province[J]. Diamond & Abrasives Engineering, 2022, 42(5): 518-522. doi: 10.13394/j.cnki.jgszz.2022.3010 |
[1] |
俞炳, 曾庆栋, 夏凡, 等. 辽宁五龙金矿构造叠加晕研究 [J]. 地质与勘探,2020,56(5):898-914.
YU Bing, ZENG Qingdong, XIA Fan, et al. Structural superimposed halo of the Wulong Gold Deposit in Liaoning Province [J]. Geology and Exploration,2020,56(5):898-914.
|
[2] |
许勇. 向深部进军不能单打独斗 [N]. 中国黄金报, 2021-05-11(2).
XU Yong. You can't go deep alone [N]. China Gold Daily, 2021-05-11(2).
|
[3] |
张伟. 金刚石绳索取芯钻进施工效率影响因素分析 [J]. 探矿工程(岩土钻掘工程),2007,34(10):22-24.
ZHANG Wei. Analysis on factors influencing drilling efficiency of diamond wire-line drilling [J]. Exploration Engineering (Rock& Soil Drilling and Tunneling),2007,34(10):22-24.
|
[4] |
叶纪超, 沈立娜, 杨甘生, 等. 金刚石压入岩石全过程研究 [J]. 金刚石与磨料磨具工程,2018,38(5):17-20. doi: 10.13394/j.cnki.jgszz.2018.5.0004
YE Jichao, SHEN Lina, YANG Gansheng, et al. Experimental study on the whole process of diamond indenting rock [J]. Diamond & Abrasives Engineering,2018,38(5):17-20. doi: 10.13394/j.cnki.jgszz.2018.5.0004
|
[5] |
王多军, 沈立娜, 吴海霞, 等. 坚硬致密石英岩地层用新型胎块钻头的研究与应用 [J]. 西部探矿工程,2014,26(4):39-40.
WANG Duojun, SHEN Lina, WU Haixia, et al. Research and application of new type bit drill bit for hard and tight quartzite formations [J]. West-China Exploration Engineering,2014,26(4):39-40.
|
[6] |
蔡家品, 贾美玲, 沈立娜, 等. 难钻进地层金刚石钻头的现状和发展趋势 [J]. 探矿工程(岩土钻掘工程),2017,44(2):67-73.
CAI Jiapin, JIA Meiling, SHEN Lina, et al. Present situation of diamond bit used in difficult drilling formation and the development trend [J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2017,44(2):67-73.
|
[7] |
沈立娜, 阮海龙. 国内外金刚石钻头的部分技术进展 [J]. 探矿工程(岩土钻掘工程),2011,38(5):78-80.
SHEN Lina, RUAN Hailong. Some technical development of diamond bit both in China and abroad [J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2011,38(5):78-80.
|
[8] |
沈立娜, 张宜, 郭庆斌, 等. 多级金刚石表孕镶钻头在坚硬岩屑砂泥岩互层的应用研究 [J]. 探矿工程(岩土钻掘工程),2018,45(12):36-39.
SHEN Lina, ZHANG Yi, GUO Qingbin, et al. Research on the application of multi-stage surface set diamond bit in very hard rock and mudstone interbed [J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2018,45(12):36-39.
|
[9] |
孙祺斌, 沈立娜, 杨甘生, 等. 特高多层胎体孕镶金刚石钻头设计与数值模拟 [J]. 煤田地质与勘探,2020,48(3):225-230. doi: 10.3969/j.issn.1001-1986.2020.03.032
SUN Qibin, SHEN Lina, YANG Gansheng, et al. Design and numerical simulation of multi-layer bit with extra-high matrix [J]. Coal Geology & Exploration,2020,48(3):225-230. doi: 10.3969/j.issn.1001-1986.2020.03.032
|
[10] |
郭庆清, 王家亮, 张绍和. 胎体弱化颗粒材质对WC基孕镶金刚石钻头胎体磨损性能的影响 [J]. 中国有色金属学报,2015,25(9):2531-2535.
GUO Qingqing, WANG Jialiang, ZHANG Shaohe. Effects of matrix weaken particle material on matrix wear resistance of diamond bit based on WC [J]. The Chinese journal of Nonferrous Metals,2015,25(9):2531-2535.
|
[11] |
叶宏煜, 杨展, 邹盛树, 等. 钻进硬而致密岩石的直角梯形齿金刚石钻头研究 [J]. 金刚石与磨料磨具工程,2020,40(6):97-101.
YE Hongyu, YANG Zhan, ZOU Shengshu, et al. Study on diamond bit with right trapezoidal cutters for drilling hard-compact rocks [J]. Diamond & Abrasives Engineering,2020,40(6):97-101.
|
[12] |
沈立娜, 李春, 吴海霞, 等. 一种金刚石取芯钻头: CN211008463U [P]. 2020-07-14.
SHEN Lina, LI Chun, WU Haixia, et al. A diamond coring bit: CN211008463U [P]. 2020-07-14.
|
[13] |
欧阳志勇, 贾美玲, 蔡家品, 等. 一种复式水路高胎体金刚石孕镶钻头: CN204419042U [P]. 2015-06-24.
OUYANG Zhiyong, JIA Meiling, CAI Jiapin, et al. A kind of high matrix diamond impregnated bit with duplex waterway: CN204419042U [P]. 2015-06-24.
|
[14] |
吴雪峰, 马路, 苑忠亮, 等. BTA深孔钻的结构优化及切削仿真分析 [J]. 哈尔滨理工大学学报,2018,23(4):18-24.
WU Xuefeng, MA Lu, YUAN Zhongliang, et al. Structural optimization and cutting simulation analysis of BTA deep-hole drilling [J]. Journal of Harbin University of Science and Technology,2018,23(4):18-24.
|
[15] |
孙吉伟, 沈立娜, 杨甘生, 等. 孕镶金刚石钻头的局部体积破碎研究 [J]. 煤田地质与勘探,2019,47(5):232-238. doi: 10.3969/j.issn.1001-1986.2019.05.033
SUN Jiwei, SHEN Lina, YANG Gansheng, et al. Study on local volume breakage of diamond impregnated bit [J]. Coal Geology & Exploration,2019,47(5):232-238. doi: 10.3969/j.issn.1001-1986.2019.05.033
|
[16] |
阮海龙, 沈立娜, 胡远彪, 等. 硬岩超高胎体偏心齿钻头的研制及应用 [J]. 钻探工程,2021,48(3):56-60.
RUAN Hailong, SHEN Lina, HU Yuanbiao, et al. Development and application of ultrahigh matrix eccentric-cutter bits for deep hard rock [J]. Drilling Engineering,2021,48(3):56-60.
|
[17] |
王达, 何远信. 地质钻探手册 [M]. 长沙: 中南大学出版社, 2014.
WANG Da, HE Yuanxin. Geological drilling handbook [M]. Changsha: Zhongnan University Press, 2014.
|