PCBN刀具切削性能和磨损机理研究综述

崔金蒙; 孟德忠; 吴哲; 岳文; 王成彪

doi:10.13394/j.cnki.jgszz.2020.6.0014

PCBN刀具切削性能和磨损机理研究综述

doi: 10.13394/j.cnki.jgszz.2020.6.0014

崔金蒙¹,
孟德忠^2,3,4,,
吴哲¹,
岳文^1,3,4,,
王成彪^3,4

1. 中国地质大学(北京) 工程技术学院, 北京 100083;
2. 中国地质大学(北京) 数理学院, 北京 100083;
3. 中国地质大学(北京) 郑州研究院, 郑州 451283;
4. 中国地质科学院郑州矿产综合利用研究所, 郑州 450006

基金项目:

国家自然科学基金项目(51875537,41572359)

中央高校基本业务费项目(2652019109)。

详细信息

作者简介:
崔金蒙，女，1993年生，硕士研究生。主要研究方向：超硬材料刀具切削磨损性能研究。E-mail: cu1jinmeng@163.com

通讯作者:
孟德忠，男，1988年生，讲师。主要研究方向：超硬材料的制备及表征。E-mail：meng@cugb.edu.cn

岳文,男,1981年生,教授、博士生导师。主要研究方向: 机械摩擦学与表面工程。E-mail:yw@cugb.edu.cn

中图分类号: TG71;TG58
计量
- 文章访问数: 661
- HTML全文浏览量: 165
- PDF下载量: 38
- 被引次数: 0
出版历程
- 修回日期: 2020-09-09
- 网络出版日期: 2022-04-06

Review on cutting performance and wear mechanism of PCBN tools

CUI Jinmeng¹,
MENG Dezhong^{2,3,4
,},
WU Zhe¹,
YUE Wen^{1,3,4
,},
WANG Chengbiao^3,4

1. School of Engineering and Technology, China University of Geosciences (Beijing), Beijing 100083, China;
2. School of Science, China University of Geosciences (Beijing), Beijing 100083, China;
3. Zhengzhou Research Institute, China University of Geosciences (Beijing), Zhengzhou 451283, China;
4. Zhengzhou Institute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological Sciences, Zhengzhou 450006, China

摘要

摘要: 聚晶立方氮化硼(PCBN)刀具是继聚晶金刚石刀具之后的又一种超硬刀具，以其独特的“以车代磨”、“硬态加工”、“干式切削”等方式被誉为21世纪的绿色环保刀具。PCBN刀具在金属切削方面具有广泛的应用，主要用来加工各种淬硬钢、耐磨铸铁等铁基材料。本文介绍了PCBN刀具成分、几何形状、切削参数等对其切削性能的影响，在此基础上分析了不同材料加工时刀具的主要磨损机理，还简单对比了硬质合金和PCBN刀具切削性能上的差异。
- PCBN刀具 /
- 磨损机理 /
- 切削性能 /
- 以车代磨 /
- 刀具寿命
Abstract: Polycrystalline cubic boron nitride (PCBN) tool is another kind of superhard tool after polycrystalline diamond tool. It is known as the green environmental protection tool in the 21st century for its unique advanced cutting methods such as turning instead of grinding, hard machining and dry cutting. PCBN tools are is widely used in metal cutting, which is mainly used for processing various kinds of hardened steel, wear-resistant cast iron and other iron-based materials. This paper introduces the influences of tool composition, tool geometry and cutting parameters on the cutting performance of PCBN tools. On this basis, the main wear mechanism of cutting tools in machining different materials are analyzed, and the cutting performance differences between cemented carbide and PCBN tools are also briefly compared.
- PCBN tools /
- wear mechanism /
- cutting performance /
- turning instead of grinding /
- tool life