Glimpse into reports on abrasive machining (Group G) during CIRP 2024 General Assembly
-
摘要: 为促进国际磨料磨具领域前沿技术交流，特选2024年CIRP Annals - Manufacturing Technology期刊中G组（磨粒加工）论文进行介绍。该专题共有9篇论文发表，按投稿先后顺序分别编号为G1～G9。论文研究主题包含磨削模型（G1/G2）、磨削加工性（G3/G4）、抛光工具（G5）、内表面抛光（G6）、化学机械抛光（G7）、抛光边缘效应（G8）以及电化学机械抛光（G9）等。本文依序对各论文的主要创新点及结论分别进行总结和介绍，供相关领域学者学习交流。Abstract: To promote the international cutting-edge technical exchange in the field of abrasives, the Group G (abrasive processing) papers in the 2024 CIRP Annals – Manufacturing Technology journal have been specially selected for introduction. A total of 9 papers on this topic have been published, numbered G1 to G9 in the order of submission. The research topics of these papers include grinding models (G1/G2), grinding machinability (G3/G4), polishing tools (G5), inner surface polishing (G6), chemical mechanical polishing (G7), polishing edge effects (G8), and electrochemical mechanical polishing (G9). This paper summarizes and introduces the main innovations and conclusions of each study to facilitate learning and communication among scholars in related fields.
-
Key words:
- finishing /
- grinding /
- polishing /
- chemical mechanical polishing /
- edge effect /
- electrochemical mechanical polishing
-
下载:
点击查看大图
图(25)
计量
- 文章访问数: 50
- HTML全文浏览量: 44
- PDF下载量: 12
- 被引次数: 0
邮件订阅
RSS
