CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 42 Issue 1
Mar.  2022
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2022  >  42(1): 69-75
YAO Yu, LIU Pengzhan, ZOU Wenjun, PENG Jin, JIAN Yaliu, HAN Ping. Application of porous CBN/Cu-Sn-Zn agglomerated abrasive in rail grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(1): 69-75. doi: 10.13394/j.cnki.jgszz.2021.0105
Citation: YAO Yu, LIU Pengzhan, ZOU Wenjun, PENG Jin, JIAN Yaliu, HAN Ping. Application of porous CBN/Cu-Sn-Zn agglomerated abrasive in rail grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(1): 69-75. doi: 10.13394/j.cnki.jgszz.2021.0105
shu

Application of porous CBN/Cu-Sn-Zn agglomerated abrasive in rail grinding wheel

doi: 10.13394/j.cnki.jgszz.2021.0105
  • 1.

    School of Material Science and Engineering, Henan University of Technology, Zhengzhou 450000, China

  • 2.

    State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China

More Information
  • Received Date: 2021-06-08
  • Accepted Date: 2021-10-12
  • Rev Recd Date: 2021-09-17
    • Available Online: 2022-03-17
    Abstract
  • To improve the grinding efficiency and service life of rail grinding wheels, a surface porous CBN/Cu-Sn-Zn compact abrasive is prepared. This work discussed the performance of Cu-Sn metal bond used for preparing agglomerated abrasives, the influence of pore structure on CBN agglomerated abrasive and the effect of agglomerated abrasive on the structural strength of grinding wheel. The grinding effect of grinding wheel before and after compound abrasive addition was evaluated by rail grinding experiment. The results show that the best porous CBN agglomerated abrasive sample has a flexural strength of 78.5 MPa, an impact strength of 5.5 kJ/m2, and a surface porosity of 30%～40%. The combined use of abrasive can effectively combine the high hardness of CBN with the good impact toughness of zirconium corundum. The grinding efficiency and grinding quality of rail grinding wheels with 20% volume concentration accumulated abrasives are further improved.

     

    • FullText(HTML)
  • loading
    • References(13)
  • [1]
    龚继军, 郭猛刚, 侯博, 等. 钢轨打磨技术发展现状及打磨策略探讨 [J]. 机车电传动,2020(3):23-29, 34.

    GONG Jijun, GUO Menggang, HOU Bo, et al. Discussion on rail grinding technology development situation and grind strategies [J]. Electric Drive For Locomotives,2020(3):23-29, 34.
    [2]
    樊文刚, 刘月明, 李建勇. 高速铁路钢轨打磨技术的发展现状与展望 [J]. 机械工程学报,2018,54(22):184-193. doi: 10.3901/JME.2018.22.184

    FAN Wengang, LIU Yueming, LI Jianyong. Development status and prospect of rail grinding technology for high speed railway [J]. Chinese Journal of Mechanical Engineering,2018,54(22):184-193. doi: 10.3901/JME.2018.22.184
    [3]
    窦礼云. 新型复合砂轮高效打磨钢轨的性能研究 [D]. 南京: 南京航空航天大学, 2019.

    DOU Liyun. Study on the performance of high efficiency grinding for grinding rail with new composite grinding wheel [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2019.
    [4]
    ZHANG W, ZHANG P, ZHANG J, et al. Probing the effect of abrasive grit size on rail grinding behaviors [J]. Journal of Manufacturing Processes,2020,53:388-395. doi: 10.1016/j.jmapro.2020.03.028
    [5]
    WANG R, ZHOU K, YANG J, et al. Effects of abrasive material and hardness of grinding wheel on rail grinding behaviors [J]. Wear,2020,454-455:203332. doi: 10.1016/j.wear.2020.203332
    [6]
    WU Y, SHEN M, QU M, et al. An experimental investigation on surface layer damage in high-efficiency and low-damage grinding of rail by slotted CBN grinding wheel [J]. The International Journal of Advanced Manufacturing Technology,2019,105(7/8):2833-2841. doi: 10.1007/s00170-019-04528-x
    [7]
    YUAN Y J, ZHANG W L, ZHANG P, et al. Porous grinding wheels toward alleviating the pre-fatigue and increasing the material removal efficiency for rail grinding [J]. Tribology International,2021,154:106692. doi: 10.1016/j.triboint.2020.106692
    [8]
    LIU P, ZOU W, PENG J, et al. Study on the effect of grinding pressure on material removal behavior performed on a self-designed passive grinding simulator [J]. Applied Sciences,2021,11(9)-4128. doi: 10.3390/app11094128
    [9]
    李端. 高铁钢轨滚磨参数对磨削性能的影响研究 [D]. 郑州: 河南工业大学, 2020.

    LI Duan. Research on the influence of high speed rail rolling parameters on grinding performance [D]. Zhengzhou: Henan University of Technology, 2020.
    [10]
    左宏森. 超硬材料烧结制品 [M]. 郑州: 郑州大学出版社, 2017.

    ZUO Hongsen. Super hard material sintered products [M]. Zhengzhou: Zhengzhou University Press, 2017.
    [11]
    韩平. 金刚石珩磨抛光油石结合剂结构和性能及其珩磨应用 [D]. 秦皇岛: 燕山大学, 2013.

    HAN Ping. Study on the performance of high efficiency grinding for grinding rail with new composite grinding wheel [D]. Qinhuangdao: Yanshan University, 2013.
    [12]
    赵亚庆, 何方. 孔隙率对多孔金属结合剂金刚石节块性能的影响 [J]. 超硬材料工程,2015,27(5):18-23. doi: 10.3969/j.issn.1673-1433.2015.05.004

    ZHAO Yaqing, HE Fang. Influence of porosity on the performances of porous metal-bond diamond blocks [J]. Super Hard Materials Engineering,2015,27(5):18-23. doi: 10.3969/j.issn.1673-1433.2015.05.004
    [13]
    ZHAO B, DING W, CHEN Z, et al. Pore structure design and grinding performance of porous metal-bonded CBN abrasive wheels fabricated by vacuum sintering [J]. Journal of Manufacturing Processes, 2019, 44: 125-132.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(12)  / Tables(1)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (278) PDF downloads(42) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return