CN 41-1243/TG ISSN 1006-852X
Volume 41 Issue 5
Oct.  2021
Turn off MathJax
Article Contents
YANG Huaiwen, FENG Wei, ZHU Jianhui, SHI Chaoyu, LIU Baoguo, WU Xiaolei, DING Hao. Dynamic characteristics of high speed grinding process of CFRP wheel and steel based wheel[J]. Diamond & Abrasives Engineering, 2021, 41(5): 52-58. doi: 10.13394/j.cnki.jgszz.2021.5.0009
Citation: YANG Huaiwen, FENG Wei, ZHU Jianhui, SHI Chaoyu, LIU Baoguo, WU Xiaolei, DING Hao. Dynamic characteristics of high speed grinding process of CFRP wheel and steel based wheel[J]. Diamond & Abrasives Engineering, 2021, 41(5): 52-58. doi: 10.13394/j.cnki.jgszz.2021.5.0009

Dynamic characteristics of high speed grinding process of CFRP wheel and steel based wheel

doi: 10.13394/j.cnki.jgszz.2021.5.0009
More Information
  • Rev Recd Date: 2021-06-21
  • To explore the influence of CFRP grinding wheel and steel substrate grinding wheel on the dynamic characteristics of high-speed grinding process, a vibration test platform was built on the CNC camshaft grinding machine, and the dynamic characteristics of grinding process were carried out.The vibration signal changes of two kinds of grinding wheel under different linear speeds and different feed speeds were compared.The surface roughness of workpiece after grinding was measured.The results show that the natural frequencies of the spindle system of CFRP grinding wheel are lower than those of the spindle system of steel matrix grinding wheel, and the dominant frequencies excited in the grinding process are in the high frequency region.With the increase of the linear speed of the grinding wheel, the surface roughness of the GCr15 workpiece fluctuates.The grinding surface roughness of the CFRP based grinding wheel is obviously smaller, which is 30%~35% less than that of the steel based grinding wheel.Before and after chatter, the surface roughness of CFRP grinding wheel changed from 0.089 μm to 0.091 μm, increasing by 2.2%.The surface roughness of steel grinding wheel changed from 0.135 μm to 0.146 μm, increasing by 8.2%.When the line speed is confirmed in a range, with the increase of feed speeds, the surface roughnesses of CFRP grinding wheel and steel substrate grinding wheel both increase, increasing by 2.4% and 2.9%, respectively.However, compared to the influence of line speed on surfaceness, the feed speed has relatively small influence on surface roughness.

     

  • loading
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(10)  / Tables(2)

    Article Metrics

    Article views (264) PDF downloads(16) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return