CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 43 Issue 6
Dec.  2023
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2023  >  43(6): 693-697
CHEN Mengkai, TENG Qi. Experiment on surface integrity of soda-lime glass with single abrasive particle variable cutting depth scratching[J]. Diamond & Abrasives Engineering, 2023, 43(6): 693-697. doi: 10.13394/j.cnki.jgszz.2022.0079
Citation: CHEN Mengkai, TENG Qi. Experiment on surface integrity of soda-lime glass with single abrasive particle variable cutting depth scratching[J]. Diamond & Abrasives Engineering, 2023, 43(6): 693-697. doi: 10.13394/j.cnki.jgszz.2022.0079
shu

Experiment on surface integrity of soda-lime glass with single abrasive particle variable cutting depth scratching

doi: 10.13394/j.cnki.jgszz.2022.0079
  • 1.

    College of Information and Intelligence Engineering, Zhejiang Wanli University, Ningbo 315100, Zhejiang, China

  • 2.

    College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China

More Information
  • Received Date: 2022-05-26
  • Accepted Date: 2022-11-27
  • Rev Recd Date: 2022-08-25
    Abstract
  • Due to the high hardness, the high brittleness and other characteristics, the hard and brittle materials represented by glass were prone to damage such as pits, brittle breakage and surface/subsurface cracks during processing, which seriously affected the performance and surface integrity. The effect of velocity variation on the crack formation and propagation and surface integrity of sodium-calcium glass during single abrasive grinding was studied. The results show that the single grain variable cutting depth scratching experiment can realize three stages of scratching, ploughing and cutting in the grinding process, and with the increase of scratching speed, the critical depth of brittle-plastic transformation of sodium-calcium glass increases, and the scratch morphology and scratch edge smoothness increase.

     

    • FullText(HTML)
  • loading
    • References(14)
  • [1]
    LI C, LI X, WU Y, et al. Deformation mechanism and force modelling of the grinding of YAG single crystals [J]. International Journal of Machine Tools and Manufacture,2019,143:23-37. doi: 10.1016/j.ijmachtools.2019.05.003
    [2]
    SHI H, LIU G, YANG G, et al. Analytical modelling of edge chipping in scratch of soda-lime glass considering strain-rate hardening effect [J]. Ceramics International,2021,47(18):26552-26566. doi: 10.1016/j.ceramint.2021.06.069
    [3]
    HU W, TENG Q, HONG T, et al. Stress field modeling of single-abrasive scratching of BK7 glass for surface integrity evaluation [J]. Ceramics International,2022,48(9):12819-12828. doi: 10.1016/j.ceramint.2022.01.153
    [4]
    QI H, SHI L, TENG Q, et al. Subsurface damage evaluation in the single abrasive scratching of BK7 glass by considering coupling effect of strain rate and temperature [J]. Ceramics International,2022,48(6):8661-8670. doi: 10.1016/j.ceramint.2021.12.077
    [5]
    QIU Z, LIU C, WANG H, et al. Crack propagation and the material removal mechanism of glass-ceramics by the scratch test [J]. Journal of the Mechanical Behavior of Biomedical Materials,2016,64:75-85. doi: 10.1016/j.jmbbm.2016.07.021
    [6]
    FENG J, WAN Z, WANG W, et al. Crack behaviors of optical glass BK7 during scratch tests under different tool apex angles [J]. Wear,2019,430-431:299-308. doi: 10.1016/j.wear.2019.05.023
    [7]
    王伟. 石英玻璃的高效可控精密磨削机理研究 [D]. 济南: 山东大学, 2017.

    WANG Wei. Research on the mechanism of efficient and controllable precision grinding of quartz glass [D]. Jinan: Shandong University, 2017.
    [8]
    YANG X, QIU Z, LI X. Investigation of scratching sequence influence on material removal mechanism of glass-ceramics by the multiple scratch tests [J]. Ceramics International,2019,45(1):861-73. doi: 10.1016/j.ceramint.2018.09.256
    [9]
    LI C, PIAO Y, MENG B, et al. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals [J]. International Journal of Machine Tools and Manufacture,2022,172:103827. doi: 10.1016/j.ijmachtools.2021.103827
    [10]
    ZHANG B, YIN J. The ‘skin effect’of subsurface damage distribution in materials subjected to high-speed machining [J]. International Journal of Extreme Manufacturing,2019,1(1):012007. doi: 10.1088/2631-7990/ab103b
    [11]
    YANG X, ZHANG B. Material embrittlement in high strain-rate loading [J]. International Journal of Extreme Manufacturing,2019,1(2):022003. doi: 10.1088/2631-7990/ab263f
    [12]
    TIAN L, FU Y, XU J, et al. The influence of speed on material removal mechanism in high speed grinding with single grit [J]. International Journal of Machine Tools and Manufacture,2015,89:192-201. doi: 10.1016/j.ijmachtools.2014.11.010
    [13]
    BANDYOPADHYAY P, DEY A, MANDAL A K, et al. Effect of scratching speed on deformation of soda–lime–silica glass [J]. Applied Physics A,2012,107(3):685-690. doi: 10.1007/s00339-012-6844-3
    [14]
    QI H, FANG J, WANG J, et al. Impact erosion by high velocity micro-particles on a quartz crystal [J]. Tribology International,2015,82:200-210. doi: 10.1016/j.triboint.2014.10.016
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(6)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (205) PDF downloads(24) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return