Glimpse into reports on abrasive machining (Group G) during CIRP 2024 General Assembly

GUO Jiang; SUN Rongyan; ZHANG Zili

doi:10.13394/j.cnki.jgszz.2024.1020

Volume 45 Issue 2

Apr. 2025

Turn off MathJax

Article Contents

Article Navigation > Diamond & Abrasives Engineering > 2025 > 45(2): 274-284

GUO Jiang, SUN Rongyan, ZHANG Zili. Glimpse into reports on abrasive machining (Group G) during CIRP 2024 General Assembly[J]. Diamond & Abrasives Engineering, 2025, 45(2): 274-284. doi: 10.13394/j.cnki.jgszz.2024.1020

Citation:

GUO Jiang, SUN Rongyan, ZHANG Zili. Glimpse into reports on abrasive machining (Group G) during CIRP 2024 General Assembly[J]. Diamond & Abrasives Engineering, 2025, 45(2): 274-284. doi: 10.13394/j.cnki.jgszz.2024.1020

Citation:

PDF( 13256 KB)

Glimpse into reports on abrasive machining (Group G) during CIRP 2024 General Assembly

doi: 10.13394/j.cnki.jgszz.2024.1020

1.
State Key Laboratory of High-Performance Precision Manufacturing, School of Mechanical Engineering, Dalian University of Technology, Dalian 116000, Liaoning, China
2.
Research Center for Ultra-Precision Science and Technology, School/Graduate School ofEngineering, University of Osaka, Osaka 5650871, Japan
3.
State Key Laboratory of Ultra-Precision Machining Technology, Department of Industrial andSystems Engineering, Hong Kong Polytechnic University, Hong Kong 999077, China

More Information

Received Date: 2024-12-14
Accepted Date: 2025-01-23
Rev Recd Date: 2025-01-14

Abstract

Abstract

To promote the international cutting-edge technical exchange in the field of abrasives, the Group G (abrasive processing) papers in the 2024 CIRP Annals – Manufacturing Technology journal have been specially selected for introduction. A total of 9 papers on this topic have been published, numbered G1 to G9 in the order of submission. The research topics of these papers include grinding models (G1/G2), grinding machinability (G3/G4), polishing tools (G5), inner surface polishing (G6), chemical mechanical polishing (G7), polishing edge effects (G8), and electrochemical mechanical polishing (G9). This paper summarizes and introduces the main innovations and conclusions of each study to facilitate learning and communication among scholars in related fields.
- finishing,
- grinding,
- polishing,
- chemical mechanical polishing,
- edge effect,
- electrochemical mechanical polishing