Application of vitrified bonded diamond wheel in YG10X cemented carbide anvil grinding

LIU Wei; LIU Yibo; HUANG Xia; YIN Xiang

doi:10.13394/j.cnki.jgszz.2018.5.0014

Volume 38 Issue 5

Oct. 2018

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Diamond & Abrasives Engineering > 2018 > 38(5): 73-77

LIU Wei, LIU Yibo, HUANG Xia, YIN Xiang. Application of vitrified bonded diamond wheel in YG10X cemented carbide anvil grinding[J]. Diamond & Abrasives Engineering, 2018, 38(5): 73-77. doi: 10.13394/j.cnki.jgszz.2018.5.0014

Citation:

LIU Wei, LIU Yibo, HUANG Xia, YIN Xiang. Application of vitrified bonded diamond wheel in YG10X cemented carbide anvil grinding[J]. Diamond & Abrasives Engineering, 2018, 38(5): 73-77. doi: 10.13394/j.cnki.jgszz.2018.5.0014

Citation:

PDF( 1090 KB)

Application of vitrified bonded diamond wheel in YG10X cemented carbide anvil grinding

doi: 10.13394/j.cnki.jgszz.2018.5.0014

LIU Wei^1,2,
LIU Yibo^{1,2
,
,},
HUANG Xia^1,2,
YIN Xiang^1,2

1. Advanced Technology & Materials Co. Ltd. Beijing 100081, China;
2. Beijing Gang Yan Diamond Products Co. Ltd. Beijing 102200, China

More Information

Rev Recd Date: 2018-08-15

Available Online: 2022-07-10

Abstract

Abstract

A new kind of anvil with high strength and densing was machined by self-designed vitrified bonded diamond grinding wheel that low diamond concentration was designed for flat surface processing and high concentration for circumferential surface processing, and the machining performance were compared with that by resin bond diamond wheel.The results show that the sharpness of vitrified bonded diamond wheel was higher than that of resin bond diamond wheel under the same conditions, the processing speed was faster, and the heat generated by grinding was much lower than that of resin bond wheel. In surface grinding, the better surface roughness using vitrified bond grinding wheel was obtained by ways of adjusting machining parameters and fine diamond grit. In cylindrical grinding, the processing efficiency of vitrified bond wheel was increased by about 50% compared with that of resin bond wheel and vitrified bond diamond wheel had higher cost-conformance when its concentration came to 200%.
- vitrified bond,
- resin bond,
- diamond wheel,
- cemented carbide anvil

FullText(HTML)

References(0)

References

Relative Articles

[1]	CHENG Xiaozhe, XU Yan, MU Yunchao, HAN Jinghe, LIU Tao. Exploration of ceramic binder diamond aggregated abrasives[J]. Diamond & Abrasives Engineering, 2024, 44(1): 31-38. doi: 10.13394/j.cnki.jgszz.2023.0022
[2]	WANG Zhao, XU Sankui, HUANG Wei, XU Tianbing, HAN Ping, YAN Guojin, CHEN Zhaoqi, WU Tanyang. Effect of B₂O₃ content on the structure and properties of SiO₂–B₂O₃–Al₂O₃–Na₂O system ceramic binder[J]. Diamond & Abrasives Engineering, 2022, 42(5): 552-559. doi: 10.13394/j.cnki.jgszz.2022.0041
[3]	FENG Ru. Study on grinding force in grinding titanium alloy with diamond grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(2): 193-200. doi: 10.13394/j.cnki.jgszz.2021.0120
[4]	XUAN Chuang, WANG Chaochao, BAI Fuhou, ZHANG Fenglin. Vitrified bond diamond grinding wheel based on hollow corundum microspheres[J]. Diamond & Abrasives Engineering, 2022, 42(4): 442-448. doi: 10.13394/j.cnki.jgszz.2021.4001
[5]	LU Jiabin, NIE Xiaowei, YAN Qiusheng, CHEN Haiyang. Research on preparation of vitrified bond lapping plates and lapping sapphire performance[J]. Diamond & Abrasives Engineering, 2021, 41(3): 48-54. doi: 10.13394/j.cnki.jgszz.2021.3.0007
[6]	LI Mingcong, XIANG Gangqiang, LI Weixiong, ZHANG Fenglin, ZHOU Yumei, LONG Weimin. Research on resin-bonded diamond grinding wheel based on brazing-coated diamond and its performances[J]. Diamond & Abrasives Engineering, 2020, 40(6): 36-41. doi: 10.13394/j.cnki.jgszz.2020.6.0007
[7]	LUO Miaodi, DING Yulong, BAO Hua, MIAO Weipeng. Effects of ball milling and dispersant on deagglomeration of vitrified bond powder[J]. Diamond & Abrasives Engineering, 2020, 40(2): 42-45. doi: 10.13394/j.cnki.jgszz.2020.2.0008
[8]	MIAO Weipeng, DING Yulong, LUO Miaodi, XIONG Huajun. Effect of sintering system on cellular structures of vitrified bond diamond wheels[J]. Diamond & Abrasives Engineering, 2020, 40(1): 56-60. doi: 10.13394/j.cnki.jgszz.2020.1.0009
[9]	DING Yulong, MIAO Weipeng, LUO Miaodi, FENG Bingqiang, ZHU Jianhui, ZHAO Yanjun, BAO Hua. Influence of structure of vitrified bond diamond grinding wheel on its performance[J]. Diamond & Abrasives Engineering, 2020, 40(4): 19-23. doi: 10.13394/j.cnki.jgszz.2020.4.0003
[10]	CHEN Zhe, CHEN Chunhui, LIU Yibo, XU Yanjun, LIU Wei, HUANG Xia, LI Yapen, KONG Shuaifei. Grinding YG8 cemented carbide with resin bond grinding wheels made of diamond agglomerate abrasive[J]. Diamond & Abrasives Engineering, 2020, 40(6): 25-30. doi: 10.13394/j.cnki.jgszz.2020.6.0005
[11]	DING Yulong, HUI Zhen, XIONG Huajun, ZHAO Yanjun, BAO Hua. Effect of calcium fluoride on grinding performance of resin-bonded diamondgrinding wheel for silicon wafer[J]. Diamond & Abrasives Engineering, 2019, 39(1): 36-40. doi: 10.13394/j.cnki.jgszz.2019.1.0007
[12]	TIAN Jiugen, HOU Yonggai. Effect of ZrSiO₄on properties and structures of low temperature vitrified bond[J]. Diamond & Abrasives Engineering, 2019, 39(6): 48-52. doi: 10.13394/j.cnki.jgszz.2019.6.0009
[13]	ZHANG Gaoliang, SHI Linfeng, ZHAO Yanjun, QIAN Guanwen, WANG Lihua, ZUO Donghua, ZHU Jianhui. Application of PA1212 in resin bond grinding wheel for PCB tools[J]. Diamond & Abrasives Engineering, 2019, 39(4): 80-84. doi: 10.13394/j.cnki.jgszz.2019.4.0014
[14]	TAN Qiuhong, ZHAO Yucheng, WANG Mingzhi, ZOU Qin. Improving strength and toughness of vitrified bond by adding nano-rare earth oxides[J]. Diamond & Abrasives Engineering, 2018, 38(6): 19-24. doi: 10.13394/j.cnki.jgszz.2018.6.0004
[15]	CHEN Kexin, LIU Yibo, CAO Caiting, LIU Wei. Performance optimization of Al-based bond matrix in metallic bond diamond wheel[J]. Diamond & Abrasives Engineering, 2018, 38(2): 20-25. doi: 10.13394/j.cnki.jgszz.2018.2.0005
[16]	ZHENG Lu, GE Peiqi, BI Wenbo, YUAN Guoqiang. Study on coating layer of resin bonded diamond wire saw[J]. Diamond & Abrasives Engineering, 2016, 36(3): 6-10. doi: 10.13394/j.cnki.jgszz.2016.3.0002
[17]	PENG Wen, PENG Wei, KONG Defang. Research on domestic BARS cemented carbide anvil[J]. Diamond & Abrasives Engineering, 2016, 36(1): 50-56. doi: 10.13394/j.cnki.jgszz.2016.1.0011
[18]	CHEN Feixiao, ZHAO Zhiwei, HU Wenmeng. Effect of nanometer Ti(C,N)on property of vitrified bond for CBN abrasives[J]. Diamond & Abrasives Engineering, 2016, 36(2): 49-54. doi: 10.13394/j.cnki.jgszz.2016.2.0011
[19]	BI Wenbo, GE Peiqi. Orthogonal experiment on coating material of resin bonded abrasive wire saw[J]. Diamond & Abrasives Engineering, 2016, 36(6): 11-14. doi: 10.13394/j.cnki.jgszz.2016.6.0003
[20]	BAI Yongming, SHANG Jiaming. Bending strength of porous metal-bond diamond wheel segment[J]. Diamond & Abrasives Engineering, 2016, 36(5): 75-78. doi: 10.13394/j.cnki.jgszz.2016.5.0015

Supplements(0)

Cited By

Cited by

Periodical cited type(3)

1.	任小柯，黄辉，苏珍发. 金刚石砂轮轴向进给磨削硬质合金时的磨削力实验研究. 金刚石与磨料磨具工程. 2022(05): 567-577 . 本站查看
2.	潘晓毅，谢德龙，林峰，陈超，肖乐银，陈家荣，莫培程. 陶瓷结合剂含量对金刚石磨具性能影响研究. 超硬材料工程. 2020(03): 8-12 .
3.	倪琪，郭华锋，郭闯闯，叶子凡. 便携式金属陶瓷涂层磨削及快速抛光装置设计. 科技创新导报. 2019(12): 113-114 .

Other cited types(2)

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views (406) PDF downloads(16)