CN 41-1243/TG ISSN 1006-852X
Volume 42 Issue 2
May  2022
Turn off MathJax
Article Contents
LI Dengchao, ZHANG Pingkuan, LI Shunshun. Design and simulation analysis of rust removal grinding block on inner wall of elbow at constant pressure[J]. Diamond &Abrasives Engineering, 2022, 42(2): 248-254. doi: 10.13394/j.cnki.jgszz.2021.0118
Citation: LI Dengchao, ZHANG Pingkuan, LI Shunshun. Design and simulation analysis of rust removal grinding block on inner wall of elbow at constant pressure[J]. Diamond &Abrasives Engineering, 2022, 42(2): 248-254. doi: 10.13394/j.cnki.jgszz.2021.0118

Design and simulation analysis of rust removal grinding block on inner wall of elbow at constant pressure

doi: 10.13394/j.cnki.jgszz.2021.0118
  • Received Date: 2021-10-24
  • Rev Recd Date: 2021-12-16
  • To remove the embroidery layer on the inner wall of the elbow before coating, three kinds of grinding blocks, namely Block A, Block B and Block C, were designed to act on the 100-mm-diameter elbow. The removal result of the embroidery layer on the inner wall of the elbow bend was analyzed by using the grinding block for rust removal simulation. Firstly, the sizes of three kinds of grinding blocks were obtained by theoretical calculation. The radius and the center angle of concave arc of the block were 65.130~74.556 mm and 6.97°~7.98°, while those of convex arc were 145.522~147.618 mm and 6.06°~6.15°. The abrasive material on the grinding block was white corundum. Then, Solidworks and Creo were used for modeling and imported into Abaqus for simulation analysis. In the simulation process, it is necessary to ensure that the pressure of the grinding block on the inner wall of the elbow bend is constant and equal. Results show that when the grinding on the inner wall of the elbow by the grinding block B is stable, the range of the concave-arc grinding depth is 0.045 0~0.053 0 mm, whose average value is 0.049 8 mm and arithmetic average deviation is 0.001 6 mm. The arithmetic mean deviation of convex arc grinding depth with 38% abrasive rate is 2.2 × 10−4 mm. After data analysis, grinding stability of Block B is better than that of other two grinding blocks. It can be concluded that the rust removal effect of Block B is the best.

     

  • loading
  • [1]
    张鹏, 彭杨. 考虑随机变量相关性的腐蚀管道失效概率 [J]. 石油学报,2016,37(10):1293-1294. doi: 10.7623/syxb201610010

    ZHANG Peng, PENG Yang. Corrosion pipeline failure probability considering random variable correlation [J]. Acta Petrolei Sinica,2016,37(10):1293-1294. doi: 10.7623/syxb201610010
    [2]
    张新生, 李亚云, 王小完. 基于逆高斯过程的腐蚀油气管道维修策略 [J]. 石油学报,2017,38(3):356-362. doi: 10.7623/syxb201703013

    ZHANG Xinsheng, LI Yayun, WANG Xiaowan. Maintenance strategy of corroded oil-gas pipeline based on inverse Gaussian process [J]. Acta Petrolei Sinica,2017,38(3):356-362. doi: 10.7623/syxb201703013
    [3]
    王天瑜. 天然气管道风险分析与安全距离计算方法研究 [D]. 北京: 中国矿业大学(北京), 2017.

    WANG Tianyu. Risk analysis and study on calculation method of safety distances for natural gas pipeline [D]. Beijing: China University of Mining & Technology(Beijing), 2017.
    [4]
    邢潇, 崔淦, 杨紫晴, 等. 管线钢的裂纹生长预测新模型 [J]. 石油学报,2019,40(6):740-747. doi: 10.7623/syxb201906010

    XING Xiao, CUI Gan, YANG Ziqing, et al. A new model to predict crack growth rate in pipeline steel [J]. Acta Petrolei Sinica,2019,40(6):740-747. doi: 10.7623/syxb201906010
    [5]
    杨锋平, 罗金恒, 李鹤, 等. X90超高强度输气钢管材料本构关系及断裂准则 [J]. 石油学报,2017,38(1):112-118. doi: 10.7623/syxb201701013

    YANG Fengping, LUO Jinheng, LI He, et al. Constitutive law and fracture criteria of X90 ultrahigh-strength gas transmission steel pipe material [J]. Acta Petrolei Sinica,2017,38(1):112-118. doi: 10.7623/syxb201701013
    [6]
    张鹏. 油气长输管线的安全性、可靠性和风险技术的研究策略 [J]. 石油工业技术监督,2000,16(9):5-8.

    ZHANG Peng. Study on the safety, reliability and risk technology of pipeline [J]. Supervision in Petroleum Industry,2000,16(9):5-8.
    [7]
    罗自治, 张传涛, 杨勇, 等. 国外管道失效原因分析及我国管道管理建议 [J]. 煤气与热力,2011,31(3):29-32.

    LUO Zizhi, ZHANG Chuantao, YANG Yong, et al. Cause analysis of foreign pipeline failures and suggestions on domestic pipeline managements [J]. Gas & Heat,2011,31(3):29-32.
    [8]
    王旭. 长输管道事故案例统计分析及对策研究 [J]. 广州化工,2013,41(14):233-235.

    WANG Xu. Statistical analysis of pipeline accident cases and the research on strategies [J]. Guangzhou Chemical Industry,2013,41(14):233-235.
    [9]
    张玲辰, 包文勃. 管道除锈方法对比及除锈意义 [J]. 黑龙江科技信息,2016(14):13.

    ZHANG Lingchen, BAO Wenbo. Pipeline derusting method comparison of grade derusting significance [J]. Heilongjiang Science and Technology Information,2016(14):13.
    [10]
    宋贤杰, 张平宽, 张卓, 等. 机械式弯管内壁除锈均匀性研究 [J]. 机械设计与制造,2020(7):143-144.

    SONG Xianjie, ZHANG Pingkuan, ZHANG Zhuo, et al. Study on derusting uniformity of inner wall of mechanical bend pipe [J]. Machinery Design and Manufacture,2020(7):143-144.
    [11]
    张宇尧. 基于恒压力的弯管内壁除锈用磨块设计及其除锈仿真研究 [D]. 太原: 太原科技大学, 2021.

    ZHANG Yuyao. Design of grinding block for derusting of elbow wall based on constant pressure and simulation study of derusting [D]. Taiyuan: Taiyuan University of Science and Technology, 2021.
    [12]
    李印江. 磨具成品组织号的计算 [J]. 磨料磨具与磨削,1988(5):23.

    LI Yinjiang. Calculate the organization number of abrasive products [J]. Abrasives and Grinding,1988(5):23.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)  / Tables(3)

    Article Metrics

    Article views (81) PDF downloads(3) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return