CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 42 Issue 5
Oct.  2022
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2022  >  42(5): 567-577
REN Xiaoke, HUANG Hui, SU Zhenfa. Experimental study on grinding force in axial feed grinding of cemented carbide with diamond grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(5): 567-577. doi: 10.13394/j.cnki.jgszz.2022.0040
Citation: REN Xiaoke, HUANG Hui, SU Zhenfa. Experimental study on grinding force in axial feed grinding of cemented carbide with diamond grinding wheel[J]. Diamond & Abrasives Engineering, 2022, 42(5): 567-577. doi: 10.13394/j.cnki.jgszz.2022.0040
shu

Experimental study on grinding force in axial feed grinding of cemented carbide with diamond grinding wheel

doi: 10.13394/j.cnki.jgszz.2022.0040
  • 1.

    School of Electromechanical and Automation, Huaqiao University, Xiamen 361021, Fujian China

  • 2.

    Xiamen Chuangyun Jingzhi Mechanical Equipment Co., Ltd., Xiamen 361006, Fujian China

More Information
  • Received Date: 2022-04-09
  • Accepted Date: 2022-06-10
  • Rev Recd Date: 2022-05-24
    • Available Online: 2022-06-10
    Abstract
  • In order to study the grinding force of diamond wheel in axial feed grinding of cemented carbide, the transformation models of horizontal grinding force, vertical grinding force, normal force and tangential force are established, the variation of grinding force under different process parameters was measured, the effects of process parameters on normal force, tangential force and axial force are analyzed, the empirical formula of grinding force is established. The results show that in the process of axial feed grinding, the maximum grinding force is the normal force, and the axial force is slightly less than the tangential force. The influence of grinding wheel linear speed on grinding force in three directions is roughly the same. The influence of grinding depth on grinding force in three directions is obviously different. The effect of feed rate on grinding force is not significant.

     

    • FullText(HTML)
  • loading
    • References(21)
  • [1]
    WANG Kaifei, ZHANG Guohua. Synthesis of high-purity ultrafine tungsten and tungsten carbide powders [J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6): 1697-1706.
    [2]
    王倩玉, 秦明礼, 吴昊阳, 等. 新型纳米晶硬质合金的研究现状及发展趋势 [J]. 粉末冶金技术,2022,40(4):1-17. doi: 10.19591/j.cnki.cn11-1974/tf.2021040010

    WANG Qianyu, QIN Mingli, WU Haoyang, et al. Research status and development trend of new nanocrystalline cemented carbide [J]. Powder Metallurgy Technology,2022,40(4):1-17. doi: 10.19591/j.cnki.cn11-1974/tf.2021040010
    [3]
    柯明峰, 吕冰海, 邵蓝樱, 等. 硬质合金刀片前刀面的剪切增稠抛光实验研究 [J]. 表面技术,2022,51(1):220-228.

    KE Mingfeng, LYU Binghai, SHAO Lanying, et al. Experimental study on shearing thickening polishing of rake surface of cemented carbide inserts [J]. Surface Technology,2022,51(1):220-228.
    [4]
    FANG S. Wear assessment of cemented carbide tools (WC-Co) with defined cutting edges under grinding-like service conditions [J]. Wear,2021,476:203744. doi: 10.1016/j.wear.2021.203744
    [5]
    VENTURA C, CRUZ D C, SORDI V L, et al. Effect of the grinding process on the wear of a cemented tungsten carbide cutting insert during turning [J]. Procedia CIRP,2021,101:174-177. doi: 10.1016/j.procir.2021.02.020
    [6]
    YANG J, ODEN M, JOHANSSON-JOESAAR M P, et al. Grinding effects on surface integrity and mechanical strength of WC-Co cemented carbides [J]. Procedia CIRP,2014,13(1):257-263.
    [7]
    LIU X, WANG H, FENG H, et al. On the enhanced wear resistance of ultra-coarse WC-Co cemented carbides by WCoB addition [J]. Journal of Alloys and Compounds,2022,894:162449. doi: 10.1016/j.jallcom.2021.162449
    [8]
    刘鹏程, 谢鹏, 李想, 等. 整体硬质合金刀具磨削工艺实验分析 [J]. 工具技术,2021,55(10):41-44. doi: 10.3969/j.issn.1000-7008.2021.10.008

    LIU Pengcheng, XIE Peng, LI Xiang, et al. Experimental analysis on grinding technology of solid carbide tools [J]. Tool Engineering,2021,55(10):41-44. doi: 10.3969/j.issn.1000-7008.2021.10.008
    [9]
    许鹏飞, 刘志林, 易为, 等. 磨削工艺对硬质合金切槽刀片刃口质量的影响 [J]. 硬质合金,2018,35(1):50-56.

    XU Pengfei, LIU Zhilin, YI Wei, et al. The effect of grinding process on cutting edge quality of carbide groove inserts [J]. Cemented Carbides,2018,35(1):50-56.
    [10]
    郑清, 姚斌, 蔡思捷, 等. 硬质合金可转位刀片周边刃磨磨削力模型研究 [J]. 组合机床与自动化加工技术,2020(8):16-20.

    ZHENG Qing, YAO Bin, CAI Sijie, et al. Research on grinding force model for peripheral grinding of cemented carbide indexable inserts [J]. Modular Machine Tool & Automatic Manufacturing Technique,2020(8):16-20.
    [11]
    宋铁军, 周志雄, 李伟, 等. 硬质合金立铣刀螺旋槽磨削表面粗糙度模型研究 [J]. 机械工程学报,2017,53(17):185-192. doi: 10.3901/JME.2017.17.185

    SONG Tiejun, ZHOU Zhixiong, LI Wei, et al. Roughness model for helical flute of cemented carbide end mill under grinding [J]. Journal of Mechanical Engineering,2017,53(17):185-192. doi: 10.3901/JME.2017.17.185
    [12]
    WIRTZ C, DEHMER A, TRAUTH D, et al. Analysis of the grinding wheel wear in dependency of the cemented carbide specification [J]. International Journal of Advanced Manufacturing Technology,2018,1-4(99):747-754.
    [13]
    KLOCKE F, WIRTZ C, MUELLER S, et al. Analysis of the material behavior of cemented carbides (WC-Co) in grinding by single grain cutting tests [J]. Procedia CIRP,2016,46:209-213. doi: 10.1016/j.procir.2016.03.209
    [14]
    熊建超, 邹芹, 李艳国, 等. WC 基硬质合金刀具材料研究进展 [J]. 金刚石与磨料磨具工程, 2019, 39(02): 95-102

    Xiong J C, Zhou Q, Li Y G, et al. Research progress of WC-based cemented carbide tool materials [J]. Diamond & Abrasives Engineering, 2019, 39(02): 95-102
    [15]
    杨军, 黄向明, 蒋福星, 等. 纳米硬质合金高速深磨工艺试验研究 [J]. 现代制造工程,2015(10):12-17,21. doi: 10.3969/j.issn.1671-3133.2015.10.004

    YANG Jun, HUANG Xiangming, JIANG Fuxing, et al. Experimental investigation on high speed grinding characteristics of the nano-cemented carbides [J]. Modern Manufacturing Engineering,2015(10):12-17,21. doi: 10.3969/j.issn.1671-3133.2015.10.004
    [16]
    陈哲, 陈春晖, 刘一波, 等. 树脂结合剂金刚石堆积磨料砂轮磨削YG8硬质合金 [J]. 金刚石与磨料磨具工程,2020,40(6):25-30.

    CHEN Zhe, CHEN Chunhui, LIU Yibo, et al. Grinding YG8 cemented carbide with resin bond grinding wheels made of diamond agglomerate abrasive [J]. Diamond & Abrasives Engineering,2020,40(6):25-30.
    [17]
    张大将, 王颖达, 陈世隐, 等. 钎焊金刚石砂轮磨削YG8硬质合金的试验研究 [J]. 超硬材料工程,2017,29(3):19-23. doi: 10.3969/j.issn.1673-1433.2017.03.003

    ZHANG Dajiang, WANG Yingda, CHEN Shiyin, et al. Experimental study of the grinding of YG8 cemented carbide by brazed diamond wheel [J]. Superhard Material Engineering,2017,29(3):19-23. doi: 10.3969/j.issn.1673-1433.2017.03.003
    [18]
    刘伟, 刘一波, 黄霞, 等. 陶瓷金刚石砂轮在YG10X顶锤磨削加工中的应用 [J]. 金刚石与磨料磨具工程,2018,38(5):73-77.

    LIU Wei, LIU Yibo, HUANG Xia, et al. Application of vitrified bonded diamond wheel in YG10X cemented carbide anvil grinding [J]. Diamond & Abrasives Engineering,2018,38(5):73-77.
    [19]
    陶洪亮, 宋鹏涛, 刘泓, 等. 陶瓷结合金刚石砂轮磨削硬质合金表面粗糙度的研究 [J]. 金刚石与磨料磨具工程,2011,31(3):54-56. doi: 10.3969/j.issn.1006-852X.2011.03.014

    TAO Hongliang, SONG Pengtao, LIU Hong, et al. Experimental research on surface roughness of cemented carbide ground with vitrified bond diamond wheel [J]. Diamond & Abrasives Engineering,2011,31(3):54-56. doi: 10.3969/j.issn.1006-852X.2011.03.014
    [20]
    ONISHI T, TAKASHIMA T, SAKAKURA M, et al. Improvement of the form accuracy of a slender workpiece in cylindrical traverse grinding [J]. International Journal of Automation Technology,2019,13(6):728-735. doi: 10.20965/ijat.2019.p0728
    [21]
    高成. 基于硬脆材料端面轴向进给的磨削力建模与实验分析研究 [D]. 温州: 温州大学, 2020.

    GAO Cheng. Grinding force modeling and experimental analysis based on axial feed grinding of hard and brittle materials [D]. Wenzhou: Wenzhou University, 2020.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(16)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (625) PDF downloads(84) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return