Citation: | FENG Lidong, LI Wenhui, LI Xiuhong, ZHANG Yan, WEN Xuejie, FAN Yu. Analysis of the influence of container structure on the flow characteristics of vertical vibration polishing granular media[J]. Diamond & Abrasives Engineering, 2024, 44(1): 1-8. doi: 10.13394/j.cnki.jgszz.2023.0067 |
[1] |
杨胜强, 李文辉, 陈红玲, 等. 表面光整加工理论与新技术[M]. 北京: 国防工业出版社, 2011.
YANG Shengqiang , LI Wenhui, ChenHongLing, et al. Surface finishing theory and new technology[M]. Beijing: National Defense Industry Press, 2011.
|
[2] |
宋春花. 滚磨光整加工过程理论及计算机仿真[M]. 北京: 电子工业出版社, 2011.
SONG Chunhua. Barrel finishing process theory and computer simulation[M]. Beijing: Publishing House of Electronics Industry, 2011.
|
[3] |
吴远超, 李秀红, 王嘉明, 等. 水平振动抛磨颗粒介质流场特性分析 [J]. 表面技术,2021,50(11):329-338. doi: 10.16490/j.cnki.issn.1001-3660.2021.11.035
WU Yuanchao, LI Xiuhong, WANG Jiaming, et al. Flow Field Characteristics Analysis of Media for Horizontal Vibratory Mass Finishing [J]. Surface Technology,2021,50(11):329-338. doi: 10.16490/j.cnki.issn.1001-3660.2021.11.035
|
[4] |
王秀枝, 杨胜强, 李文辉, 等. 薄壁片状试件贴壁式振动光饰实验研究 [J]. 表面技术,2017,46(10):261-267.
WANG Xiuzhi, YANG Shengqiang, LI Wenhui, et al. Experimental Investigation of Adherent Vibratory Finishing for Sheet Specimens [J]. Surface Technology,2017,46(10):261-267.
|
[5] |
WANG X Z, YANG S Q, LI W H, et al. Vibratory finishing co-simulation based on ADAMS-EDEM with experimental validation [J]. The international journal of manufacturing technology,2018(96):1175-1185. doi: 10.1007/s00170-018-1639-0
|
[6] |
KANG Y S, HASHIMOTO F, JOHNSON S P, et al. Discrete element modeling of 3D media motion in vibratory finishing process [J]. CIRP annals,2017,66(1):313-316. doi: 10.1016/j.cirp.2017.04.092
|
[7] |
ZHANG C, LIU W, WANG S, et al. Dynamic modeling and trajectory measurement on vibratory finishing [J]. International journal of advanced manufacturing technology,2019,106(1/2):253-263.
|
[8] |
LUCAS D S M, SPELT J K. Comparison of DEM predictions and measured wall-media contact forces and work in a vibratory finisher [J]. Powder technology,2020(366):434-447. doi: 10.1016/j.powtec.2020.02.014
|
[9] |
LUCAS D S M, SPELT J K. Influence of process parameters on average particle speeds in a vibratory finisher [J]. Granular matter,2018,20(4):1-11.
|
[10] |
FENG L Q, SEBASTIEN K D R, MATHIEU J, et al. DEM simulation of dense granular flows in a vane shear cell: Kinematics and rheological laws [J]. Powder technology,2020(366):722-735. doi: 10.1016/j.powtec.2020.03.008
|
[11] |
CHUN Y C, HSIAU S S, LIAO H H, et, al. An improved PVT technique to evaluate the velocity field of non-sphe-rical particles [J]. Power technology,2010,202(1-3):151-161. doi: 10.1016/j.powtec.2010.04.032
|
[12] |
CHEN B D, WU P, XING H H, et al. Convection behavior of ellipsoidal particles in a quasi-two-dimensional bed under vertical vibration [J]. Powder technology,2020(363):575-583. doi: 10.1016/j.powtec.2020.01.004
|
[13] |
张建丽, 李文辉, 张荔, 等. 振动式滚磨光整加工过程中的受力测试与分析 [J]. 表面技术,2015(7):120-124.
ZHANG Jianli, LI Wenhui, ZAHNG Li, et al. Force Test and Analysis in the Process of Vibratory Barrel Finishing [J]. Surface Technology,2015(7):120-124.
|
[14] |
HODGSON B S. Vibratory Finishing Appartus: GB2187122A[P]. 1987-09-03
|
[15] |
王志成, 李文辉, 李秀红, 等. 整体叶盘回转辅助水平振动式抛磨的颗粒力学行为仿真分析 [J]. 金刚石与磨料磨具工程,2022,42(5):617-625. doi: 10.13394/j.cnki.jgszz.2022.0051
WANG Zhicheng, LI Wenhui, LI Xiuhong, et al. Simulation analysis of particle mechanical behavior in rotary-assisted horizontal vibration polishing of blisk [J]. Diamond & Abrasives Engineering,2022,42(5):617-625. doi: 10.13394/j.cnki.jgszz.2022.0051
|
[16] |
张荔, 李文辉, 杨胜强. 滚磨光整加工中磨料颗粒堆积角的离散元参数标定 [J]. 中国科技论文,2017,30(1):33-40.
ZHANG Li, LI Wenhui, YANG Shengqiang. Discrete element parameter calibration of abrasive particle stacking angle in barrel finishing [J]. Chinese Scientific Papers,2017,30(1):33-40.
|
[17] |
陈玉楠, 李文辉, 李秀红, 等. 主轴式滚磨光整加工过程中滚抛磨块作用力测试与分析 [J]. 中国表面工程,2017,30(1):33-40. doi: 10.11933/j.issn.1007-9289.20160803001
CHENG Yunan, LI Wenhui, LI Xiuhong, et al. Force Test and Analysis of Abrasive in Spindle Barrel Finishing Process [J]. China Surface Engineering,2017,30(1):33-40. doi: 10.11933/j.issn.1007-9289.20160803001
|
[18] |
高佳程, 田蕴卿, 朱永利, 等. 基于完全集合经验模态分解和排列熵的局部放电信号的小波去噪方法. [J]电力系统及其自动化学报, 2018, 30(3): 1-7.
GAO Jiacheng, TIAN Yunqing, ZHU Yongli, et al. Wavelet Package Denoising Method for Partial Discharge Signals Based on CEEMD and PE[J]. Proceedings of the CSU-EPSA, 2018, 30(3): 1-7.
|
[19] |
高佳程. 电力设备局部放电信号去噪及特征提取方法的研究[D]. 北京: 华北电力大学, 2019.
GAO Jiacheng. Study on Denoising and Feature Extraction Approaches for Partial Discharge Signals in Electrical Equipment[D]. Beijing: North China Electric Power University, 2019.
|